RM676

PCI Edge Connect Fiber Gigabit Ethernet NIC
Default-image

This product entered a Restricted Production Phase (RPP) on August 31, 2010

Please refer to downloads section below if you require documentation or software. If you have any questions or require product support, including help migrating to our latest products, please contact us.
To see all end of life products CLICK HERE.

Overview

RM676 is a Gigabit Ethernet PCI NIC with dual 1000BaseSX interfaces. The card is capable of full duplex operation on each of its channels. The Ethernet/PCI/PCI-X interface includes a powerful DMA engine for each port with very deep FIFO buffers (64K byte). This assures continuous, full bandwidth operation with minimum PCI overhead. The RM676 has SC connectors. The RM676 does not have a PCI-to-PCI bridge on board. RM676 has a rich suite of host off-loading feature including: Packet filtering based on checksum errors; SNMP and RMON statistic counters; Hardware TCP checksum off-loading; and Support for various address filtering modes such as 16 exact matches (unicast or multicast), 4096-bit hash filter for multicast frames and Promiscuous unicast and multicast. Two RM676 boards can be directly cabled with a simple "cross-over". This configuration creates a full duplex 1000Mbit dedicated data path - delivering high bandwidth at very low cost. More complex, dedicated interconnects can be created using a hub or switch. Both point-to-point and switched hubs, in full duplex mode, remove many determinism concerns raised with traditional Ethernet solutions. This makes the RM676 an excellent candidate for high performance interconnects that require real time determinism. Software drivers are available for most popular operating systems including Windows, Linux, LynxOS, Vxworks and Solaris. These drivers have been carefully designed and implemented to fit within the LAN protocol stack of the host operating system. Thus all facilities available from the host OS can be used across the RM676. Solaris OBP and PXE boot options are available.



  • Options: 1000BaseLX, single port, LC connectors, RoHS compliance, Solaris OBP boot option, PXE boot option, acrylic or polyurethane conformal coating
  • SC connectors
  • Jumbo Frames capable
  • PCI-X, PCI 64-bit/66MHz
  • Full 1000Mbit point to point performance
  • Dual 1000BaseSX fiber Ethernet
  • DMA engine

Specifications

Form Factor
PCI
Front Panel I/O Connectors
SC
Media
Fiber
PCI Controller/ Ethernet MAC
Intel 82546
Port Type
1000BaseSX
Ports
2

Request A Quote

RM676

PCI Edge Connect Fiber Gigabit Ethernet NIC
Default-image
Mailing List
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

Your information will be used in accordance with our privacy policy.

Contact An Expert

Looking for help with RM676

PCI Edge Connect Fiber Gigabit Ethernet NIC

Please enter your location

Default-image

Get Support

Looking for help with RM676

PCI Edge Connect Fiber Gigabit Ethernet NIC
Default-image
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

Your information will be used in accordance with our privacy policy.

Can’t find what you’re looking for? Need help?

Head on over to our support pages, where you’ll find key contacts, how to obtain documentation, information on warranty and repairs, contract samples, details of our Product Lifecycle Management and Configuration Management programs – and much more.